Customization: | Available |
---|---|
Installation: | Indoor |
Lifting Height: | 1600mm |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Introduction
TPTP-2 is a kind of simple parking lift, that specially designed for indoor garages or parking lots with low ceiling height. This parking lift system has tilted platform that makes more parking spaces in tight area possible. the parking lift can stack 2 sedans above each other and is suitable for both commercial and residential buildings that have limited ceiling clearances and restricted vehicle heights. The car on ground has to be removed to use the upper platform, the parking lift system is ideal for cases when the upper platform used for permanent parking and the ground space for short-time parking. Individual operation of parking lift can be easily made by the key switch panel in front of the parking lift system.
Model | TPTP-2 |
Rated capacity | 2000kg |
Lifting height | 1600mm |
Usable platform width | 2100mm |
Power pack | 2.2Kw hydraulic pump |
Available voltage of power supply | 100V-480V, 1 or 3 Phase, 50/60Hz |
Operation mode | Key switch |
Operation voltage | 24V |
Safety lock | Mechanical anti-falling lock |
Lock release | Electric auto release |
Rising / descending time | <40s |
Finishing | Powder coating |
1. Mechanical anti-falling safety lock on the parking lift system holds the platform to prevent falling
2. New and unique carriage mechanism of the parking lift keeps the platform always horizontal no matter forward or reverse parking
3. 24v electric lock release has no harm for operator
4. Electric protection for power over load or under voltage.
5. Auto locking system in case electrical failure
6. Emergency stop button can be pressed to stop platform of the parking lift system moving at once
7. Pressure relief valve & throttle valve
8. Limited switch on the post of parking lift system. When the platform goes to the appointed height, the parking lift will be stopped at once to make sure cars parked within restricted height.
9. Synchronization shaft keeps the platform of parking lift system always in balance
10. Electric protection for power over load or under voltage
Reinforced backboard of the car parking lift
keeps car parked at targeted position
Mechanical anti-falling locks
hold the platform at top postion to avoid any falling
Mechanical balance shaft
ensures platform moves always in balance
Hydraulic cyilnder direct drive
makes movement fast and smooth
Laser cutting + Robotic welding
Accurate laser cutting improves the accuracy of the parts, and automated robotic welding makes the weld joints more firm and beautiful
Company overview
Qingdao Mutrade Co., Ltd. is one of the earliest professional mechanical parking equipment providers in China. We are committed to provide the most suitable and cost-effective parking equipment to our clients all over the world. We warmly welcome your visit.