Hydraulic Outdoor Double Stacker 2 Post Tilting Type Low Ceiling Parking Lift

• Customization: Available
• Lifting Height: 1600mm
• Warranty: 5 Years for Main Structure and 1 for Year Part
• Model NO.: TPTP-2
• Rated Capacity: 2000kg
• Usable Platform Width: 2100mm
• Vehicle Size: 5000mmx1850mmx1550mm
• Lock Mode: Position Lock
• Drive Mode: Hydraulic
• Finishing: Powder Coating
• Transport Package: Standard Export Packing
• Specification: CE / ISO9001
• Trademark: Mutrade Parking / HydroPark
• Origin: Qingdao, China
• HS Code: 84289020
• Production Capacity: 500 Set/Sets Per Month

Product Description

Introduction

TPTP-2 is a kind of simple parking lift, that specially designed for indoor garages or parking lots with low ceiling height. This parking lift system has tilted platform that makes more parking spaces in tight area possible. the parking lift can stack 2 sedans above each other and is suitable for both commercial and residential buildings that have limited ceiling clearances and restricted vehicle heights. The car on ground has to be removed to use the upper platform, the parking lift system is ideal for cases when the upper platform used for permanent parking and the ground space for short-time parking. Individual operation of parking lift can be easily made by the key switch panel in front of the parking lift system.


 

1. Ultra low noise
This parking lift is driven by dual hydraulic cylinders, which makes the operation and platform movement of the parking lift system more smooth and quiet.

2. Safe and reliable
Advanced product design, high end workmanship and multiple safety features ensures the parking lift extremely safe and reliable.

3. Fast and easy installation
With part of structure pre-installed in the factory, this parking lift system is very easy on the installation work.

4. Simple operation
Turn the key switch on the control panel to easily operate the parking lift, and automatic release the mechanical locks when platform descending.

5. Consumer product level finishing
A better powder coating as the standard surface treatment of the parking lift system provides consumer product level finishing.

6. Top quality processing
The TPTP-2 parking lift is 100% cut by laser and more than 60% welded by robot.

7. Professional packing & delivery team
With more than 10 years and thousands of units installation experience, professional packing and loading work protect the parking lift system from damage and make unload the parking lift easily.

8. Suitable for both home use and public use
This parking lift is designed for indoor garage with low ceiling height, so the parking lift system can accommodate both home and public parking garages.
 

Specifications

Model	TPTP-2
Rated capacity	2000kg
Lifting height	1600mm
Usable platform width	2100mm
Power pack	2.2Kw hydraulic pump
Available voltage of power supply	100V-480V, 1 or 3 Phase, 50/60Hz
Operation mode	Key switch
Operation voltage	24V
Safety lock	Mechanical anti-falling lock
Lock release	Electric auto release
Rising / descending time	<40s
Finishing	Powder coating

 

Safety features

1. Mechanical anti-falling safety lock on the parking lift system holds the platform to prevent falling

2. New and unique carriage mechanism of the parking lift keeps the platform always horizontal no matter forward or reverse parking

3. 24v electric lock release has no harm for operator

4. Electric protection for power over load or under voltage.

5. Auto locking system in case electrical failure

6. Emergency stop button can be pressed to stop platform of the parking lift system moving at once

7. Pressure relief valve & throttle valve

8. Limited switch on the post of parking lift system. When the platform goes to the appointed height, the parking lift will be stopped at once to make sure cars parked within restricted height.

9. Synchronization shaft keeps the platform of parking lift system always in balance

10. Electric protection for power over load or under voltage